Automatic Grease Lubrication System

We are involved in supplying and designing of Automatic Grease Lubrication System that is specifically manufactured for pumping grease to the dose feeders installed at the lubricating points in the end type dual line grease lubrication system. Grease from the reservoir flows into the plunger pump driven by electric motor and is pumped through direction control valve to one of the two pipelines. We provide superlative Automatic Grease Lubrication System to the customers as per their requirements.

 

Product Features

http://catalog.weblink.in/

 

Special Features
  • Dual line heavy duty automatic
  • Centralized grease lubrication (CGL)
  • Station end type
  • Smooth performance
  • D S D design
  • Easy to operate
  • Sound construction
  • Highly sophisticated technically integrated mechanism
Applications
  • Cement Plants
  • Steel Plants
  • Power industry
  • Paper Industry
  • Engineering industry

 

Specifications

Pump Type Plunger Pump
Capacity 150 cc/min – Model AGS 150
300 cc/min – Model AGS 300
500 cc/min – Model AGS 500
1000 cc/min – Model AGS 1000
Plunger Diameter 22 mm
Plunger Stroke 32 mm
Plunger Effective Stroke 10 mm
16 mm
26 mm
20 mm
Worm Ratio 20 : 1 (Upto 500 cc.min)
10 : 1 (For 100 cc/min))
Working Pressure 100 – 300 kg/cm2 (max)
Grease Consistency Upto NLGI No. 2
Reservoir Capacity 70 Litres / 140 Litres
Tell-tale Rod Marking 20 Litres (Each Division)
Solenoid Value Type 4 Way (Heavy Duty)
Solenoid Value W. Pressure 300 kg/cm2 (max)
Solenoid Pull 6.75 kg.
Electric Motor 1.5 H.P / 2.0 H.p 1500 RPM (nom.)
Power Supply 440 Volts A.C. 50 c/s.
Control Panel Supply 220V AC 50 c.s.
Net Weight 320 kg. (approx)

Note : For details of Solenoid Value refer out CAT No. SV/6441/07/XII/ 1196

Leave a Reply

Your email address will not be published. Required fields are marked *